Basic Knowledge

①Keep away from pyrogen and combustion source;

②Keep away from sunshine;

③Do not dismantle or squeeze the battery pack;

④Take out the battery pack to prevent battery fluid leakage to damage thermal imager when thermal imager is idle for a long term;

⑤Use a regular and in line with the charging specifications of the power adapter for charging;

⑥Keep the battery pack clean and dry;

⑦Clean battery connection interface via a soft brush or dry cotton swab.

Using rubber suction bulb to clean the dust covers on the surface of LCD screen first. If there is stubborn dust or vapor on it, please slightly clean it via the professional cleaning wiping cloth or dry soft cloth.

Note: Do not use excessive force during cleaning to avoid damage to the screen.

The surface of the infrared thermal imaging lens is attached with a fine anti-reflective coating. Do not use too much force to damage the anti-reflective coating. If professional cleaning equipment is available, you can clean the lens surface particles via compressed air tank or dry nitrogen ion gun. Otherwise, soak the flannelette in lens cleaner containing alcohol, ethanol or vinyl. Before cleaning, remove the excess liquid from the cloth and gently wipe the lens surface in a circular motion.

Material adopted by body shell of infrared thermal imager is silicon gel, it is recommended to clean with a cloth dipped in mild alkaline soapy water. Do not clean with corrosive liquid such as abradant, isopropanol, and dissolvent.

To ensure products can be circulated normally in market, products must meet the local laws and regulations before sale, it means products need to pass the certification test. Products cannot be sold in market without certificates.

Certificates marking will be print on side surface of product body, you can check on it for details.

If you need to download products certificates, please contact with our sales team.

UL certificate is produced by the most authoritative safety accrediting agency “Underwriter Laboratories Inc.” in US. It detects the products in a scient testing way to confirm whether the products can meet the safety standard required by the market. Service items provided by UL including “Listed”, “Recognized”, and “Classification”, EMC characteristic is excluded in the certification range of UL. UL certification is non-mandator in US. In summary, UL certification is an important indicator of product safety and a major consideration in product selection.

RoHS is an instruction that limits to use some harmful materials for electrical and electronic equipment. Issuing RoHS instruction is aimed to coordinate WEEE instruction, advocate environment protection and energy saving, prevent waste generation, also reduce resource wasting for waste recycling, reuse, and remanufacturing.

To ensure the safety of radio and wire communication products related to life and property, all products applicable to FCC instruction must own FCC certificates before launching America. FCC marking can be viewed on product package or body.

UKCA (UK Conformity Assessed) is a product conformity assessment system created in UK local. From January, 1^st, 2021 on, all newly manufactured products applicable to UKCA instruction are required to meet the standard test stipulated by UK regulations. Products can only be circulated in UK market after obtained UKCA certificates.

Note: Products manufactured before 2021 year can still be sold in UK market by CE certificates.

CE certification is a basic safety requirement to limit the product that do not endanger the safety of human, animal, and goods, rather than general quality requirement. CE marking is a mandatory certification marking. All products circulated on EU market must be print CE marking to indicate that the products have been evaluated before launching to market, and meet the basic legal requirements for sales. CE marking can be viewed on product package or body.